What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: SMVP15C
Description: SMVP15C stainless steel sliding vane pump with seal-less magnetic coupling for a durable, leak-free operation.
SMVP15C-product image
ImageSetByPath

SMVP15C, Seal-Less, Magnetic Coupling, Single Ended, 17 GPM

Item: SMVP15C
Description: SMVP15C stainless steel sliding vane pump with seal-less magnetic coupling for a durable, leak-free operation.
  • Mounting: PUMP ONLY
  • Inlet Size: 1 1/2
  • Model: SMVP15C
  • Discharge Size: 1 1/2
  • Max Operating Pressure: 175.0
  • Max Flow Rate (GPM): 17.0
Attributes for item SMVP15C
Shipping Weight (lbs):
32
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
4 HNBR ELASTOMERS
Flanges:
0 TAPPED-PORTS
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
AR 8 VANE RH ROTATION
Relief Valve Spring Setting:
80
Relief Valve Spring:
3 51-80 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
BL SJCJ SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item SMVP15C
Performance for item SMVP15C

At 1750 RPM and 100 psi differential pressure, the SMVP15C pump requires 1.8 bhp (1.35 kW) to handle a fluid with a viscosity of 30 SSU.

At 1750 RPM and 100 psi differential pressure, the SMVP15C pump delivers 9.0 gpm (34 lpm) of a fluid with a viscosity of 30 SSU.

Item Overview for Blackmer SMVP15C
The Blackmer SMVP15C is a single-ended sliding vane pump built in stainless steel construction for the safe, completely leak-free transfer of critical high-value, hazardous, or hard-to-seal fluids. Mechanical seals and HNBR elastomers guard the drive end against leakage and swelling. Tapped ports tie the unit into existing piping without custom adapters. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid. As part of the SGL lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 17 GPM, shortening load and unload cycles. An eight-vane rotor turning right-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life.