What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: HXLJ8G
Description: HXLJ8G jacketed sliding vane pump, for use in high-viscous and high-temperature applications.
HXLJ8G-product image
ImageSetByPath

HXLJ8G, Vane Pump, Jacketed, Double Ended, Base Mount, Ductile Iron, 1,190 GPM

Item: HXLJ8G
Description: HXLJ8G jacketed sliding vane pump, for use in high-viscous and high-temperature applications.
  • Mounting: PUMP ONLY
  • Inlet Size: 8
  • Model: HXLJ8G
  • Discharge Size: 8
  • Max Operating Pressure: 250.0
  • Max Flow Rate (GPM): 1190.0
Attributes for item HXLJ8G
Shipping Weight (lbs):
1170
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Compressor Other:
0 STANDARD OTHER
Crankshaft:
C Std Length Crank
Cylinder:
A Ductile Iron
Elastomers:
2 FKM ELASTOMERS
Flanges:
N NPT FLANGES
Mounting:
PUMP ONLY
Packing Material:
T PTFE
Packing Type:
1 TYPE 1
Piston Ring:
M Glass/Moly Fill PTFE P-Rings
Relief Valve:
1 BOLT ON RV
Rotor and Shaft:
8R SINGLE END KEYED EC RH
Relief Valve Spring Setting:
66
Relief Valve Spring:
3 51-80 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
1 JACKET OPTION
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
AC RVBV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
8 BRONZE-EC
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item HXLJ8G
Performance for item HXLJ8G

At 100 RPM and 100 psi differential pressure, the HXL8/HXLJ8 pump requires 30 bhp (22.4 kW) to handle a fluid with a viscosity of 30,000 SSU.

At 100 RPM and 100 psi differential pressure, the HXL8/HXLJ8 pump delivers 316 gpm (1,196 lpm) of a fluid in the 500 to 50,000 SSU viscosity range.

Item Overview for Blackmer HXLJ8G
The Blackmer HXLJ8G is a 8" double-ended, base-mounted sliding vane pump finished in ductile iron construction. It also brings pre-engineered Integrated Unit Assemblies for drop-in installation. As part of the HXL lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 1,190 GPM, shortening load and unload cycles. Power reaches the pumping chamber through a keyed single-ended shaft, where bronze vanes ride out against the liner to sustain flow as they wear. Containment comes from mechanical seals backed by FKM elastomers, a combination chosen for punishing liquids. NPT connections speed connection during commissioning and later service. Overpressure protection arrives built in, with a bolt-on relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid.