Description: XRLF1.25B high-speed sliding vane pump, for use in processing, filling and transfer applications.
Mounting: PUMP MOUNTED ON UNIT ASSEMBLY
Inlet Size: 1 1/4
Model: XRLF1.25B
Discharge Size: 1 1/4
Max Operating Pressure: 350.0
Max Flow Rate (GPM): 17.0
2840.00
Item failed to add in the cart.
The quantity you entered is too large.
Buy now, pay later
Net 30 credit terms 0% interest for 30 days Get Approved Today
Attributes
Recommendations & Parts
Performance
Downloads
Attributes for item XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX
Shipping Weight (lbs):
88
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Mounting:
1
Elastomers:
2 FKM ELASTOMERS
Flanges:
0 TAPPED-PORTS
Motor Frame:
M143TC
Motor Type:
NO MOTOR
Mounting Unit:
DM UNIT
Ratio:
RATIO 1.00-1750-1450
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
66
Relief Valve Spring:
3 51-80 PSI STEEL RV SPRING
Standard Construction 1:
E W/O FT 140TC, 180C
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
Lead Time (days):
27
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX
Performance for item XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX
At 100 RPM and 100 psi differential pressure, the XRL1.25/XRLF1.25 pump delivers 0.5 gpm (2.0 lpm) and requires 0.17 bhp (0.13 kW) with a fluid viscosity of 20,000 SSU.
Downloads for item XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX
Item Overview for Blackmer XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX
The Blackmer XRLF1.25B/4/1R/S0/1/3/2/E/0/0/0/0/0/MT/DM/R0100/M143TC/MTRX pairs ductile iron construction with a high-speed sliding vane pump layout suited to industrial process transfer. As part of the XL lineup, it shares parts and service procedures with the rest of the range. Rated for flows reaching 17 GPM, it holds output steady as line conditions shift. A single-ended keyed shaft turning right-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. Tapped ports tie the unit into existing piping without custom adapters. An internal relief valve protects the system from damaging pressure spikes. It ships as a complete drive package with DM unit mounting, ready to set in place and connect. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class.