What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR
Description: XRLF1.25B high-speed sliding vane pump, for use in processing, filling and transfer applications.
XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR-product image
ImageSetByPath

XRLF1.25B, Vane Pump, High Speed, Reduced Rate, Flanged Motor, Close Coupled, Ductile Iron, 17 GPM

Item: XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR
Description: XRLF1.25B high-speed sliding vane pump, for use in processing, filling and transfer applications.
  • Mounting: PUMP ONLY-WITH TESTS/CERTS
  • Inlet Size: 1 1/4
  • Model: XRLF1.25B
  • Discharge Size: 1 1/4
  • Max Operating Pressure: 350.0
  • Max Flow Rate (GPM): 17.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR
Shipping Weight (lbs):
137
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Certifications:
Material Report
Tests and Certifications:
1
Elastomers:
2 FKM ELASTOMERS
Flanges:
0 TAPPED-PORTS
Mounting:
PUMP ONLY-WITH TESTS/CERTS
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1L SINGLE END KEYED LH
Relief Valve Spring Setting:
116
Relief Valve Spring:
6 81-150 PSI STEEL RV SPRING
Standard Construction 1:
W W/O FT IEC100/112 B14A
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Tests:
No Tests Required
Vanes:
4 DURAVANE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR
Performance for item XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR

At 100 RPM and 100 psi differential pressure, the XRL1.25/XRLF1.25 pump delivers 0.5 gpm (2.0 lpm) and requires 0.17 bhp (0.13 kW) with a fluid viscosity of 20,000 SSU.

Item Overview for Blackmer XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR
The Blackmer XRLF1.25B/4/1L/S0/1/6/2/W/0/0/0/0/0/PO-TC/TEST-X/X/MR is a high-speed sliding vane pump built in ductile iron construction for industrial process transfer. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. Documentation such as material reporting is available where project records demand traceability. As part of the XL lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 17 GPM, shortening load and unload cycles. A single-ended keyed shaft turning left-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. Tapped ports tie the unit into existing piping without custom adapters. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid.