Just answer a few questions, and our Product Finder will guide you to the right solution!
Item: XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
Description: XRLF1.25B high-speed sliding vane pump, for use in processing, filling and transfer applications.
PUMPS
XRLF1.25B, Vane Pump, High Speed, Reduced Rate, Flanged Motor, Close Coupled, Ductile Iron, 17 GPM
Item: XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
Description: XRLF1.25B high-speed sliding vane pump, for use in processing, filling and transfer applications.
Mounting: PUMP ONLY
Inlet Size: 1 1/4
Model: XRLF1.25B
Discharge Size: 1 1/4
Max Operating Pressure: 350.0
Max Flow Rate (GPM): 17.0
3255.00
Item failed to add in the cart.
The quantity you entered is too large.
Buy now, pay later
Net 30 credit terms 0% interest for 30 days Get Approved Today
Attributes
Recommendations & Parts
Performance
Downloads
Attributes for item XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
Shipping Weight (lbs):
540
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
3 PTFE ELASTOMERS
Flanges:
0 TAPPED-PORTS
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1L SINGLE END KEYED LH
Relief Valve Spring Setting:
35
Relief Valve Spring:
1 20-50 PSI STEEL RV SPRING
Standard Construction 1:
C W/O FT 56C
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
Performance for item XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
At 100 RPM and 100 psi differential pressure, the XRL1.25/XRLF1.25 pump delivers 0.5 gpm (2.0 lpm) and requires 0.17 bhp (0.13 kW) with a fluid viscosity of 20,000 SSU.
Downloads for item XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
Item Overview for Blackmer XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO
The Blackmer XRLF1.25B/4/1L/S0/1/1/3/C/0/0/0/0/0/PO pairs ductile iron construction with a high-speed sliding vane pump layout suited to industrial process transfer. Installation stays simple thanks to tapped ports that match common piping practice. An internal relief valve protects the system from damaging pressure spikes. The bare-shaft build lets integrators match an existing drive or specify a new one. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the XL lineup, it shares parts and service procedures with the rest of the range. Rated for flows reaching 17 GPM, it holds output steady as line conditions shift. The drivetrain pairs a single-ended keyed shaft turning left-hand with Duravane vanes, keeping volumetric efficiency stable between rebuilds. Mechanical seals work alongside PTFE elastomers to contain aggressive media and resist chemical attack.