PSG Store is becoming ABORA Stay tuned. Learn more

What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
Description: XL4C sliding vane pump, for use in processing, filling and transfer applications.
XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168-product image
ImageSetByPath

XL4C, Vane Pump, High Speed, Single Ended, Ductile Iron, 345 GPM

Item: XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
Description: XL4C sliding vane pump, for use in processing, filling and transfer applications.
  • Mounting: PUMP MOUNTED ON UNIT ASSEMBLY
  • Inlet Size: 4
  • Model: XL4C
  • Discharge Size: 4
  • Max Operating Pressure: 350.0
  • Max Flow Rate (GPM): 345.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
Shipping Weight (lbs):
310
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Mounting:
1
Elastomers:
2 FKM ELASTOMERS
Flanges:
W WELD FLANGES
Motor Frame:
M213T
Motor Type:
MOUNT BLACKMER SUPPLIED MOTOR
Motor:
7.5HP 18R 60HZ 3P 230/460V TE 213T
Mounting Unit:
Obsolete_HRB UNIT
Ratio:
RATIO 9.18-190-160
Relief Valve:
2 CORROSION RESISTANT RV
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
63
Relief Valve Spring:
3 51-75 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
Lead Time (days):
27
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
Performance for item XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168

At 640 RPM and 100 psi differential pressure, the XL4 pump delivers 344 gpm (1,302 lpm) and requires 30 bhp (22.4 kW) with a fluid viscosity of 5,000 SSU.

Downloads for item XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
Item Overview for Blackmer XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168
The Blackmer XL4C/4/1R/S0/2/3/2/0/0/0/0/W/0/MT/HRB/R0918/M213T/MTRB/TE929168 pairs 4" ductile iron construction with a single-ended, high-speed sliding vane pump layout suited to processing, filling, and high-capacity transfer applications in refineries, lube oil plants, and general industry. It ships as a complete drive package with a factory-mounted motor and a 9.18:1 gear reducer, ready to set in place and connect. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the XL lineup, it shares parts and service procedures with the rest of the range. Rated for flows reaching 345 GPM, it holds output steady as line conditions shift. A single-ended keyed shaft turning right-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. Weld flanges tie the unit into existing piping without custom adapters.