PSG Store is becoming ABORA Stay tuned. Learn more

What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
Description: XL1.5A high-speed sliding vane pump, for use in processing, filling and transfer applications.
XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO-product image
ImageSetByPath

XL1.5A, Vane Pump, High Speed, Single Ended, Ductile Iron, 35 GPM

Item: XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
Description: XL1.5A high-speed sliding vane pump, for use in processing, filling and transfer applications.
  • Mounting: PUMP ONLY
  • Inlet Size: 1 1/2
  • Model: XL1.5A
  • Discharge Size: 1 1/2
  • Max Operating Pressure: 350.0
  • Max Flow Rate (GPM): 35.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
Shipping Weight (lbs):
166
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
2 FKM ELASTOMERS
Flanges:
0 TAPPED-PORTS
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
66
Relief Valve Spring:
3 51-80 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
6 LAMINATE-EC
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
Performance for item XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO

At 100 RPM and 100 psi differential pressure, the XL1.5/XLF1.5 pump delivers 1.5 gpm (5.7 lpm) and requires 0.32 bhp (0.24 kW) with a fluid viscosity of 20,000 SSU.

Downloads for item XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
Item Overview for Blackmer XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO
The Blackmer XL1.5A/6/1R/S0/1/3/2/0/0/0/0/0/0/PO is a single-ended, high-speed sliding vane pump finished in ductile iron construction. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the XL lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 35 GPM, shortening load and unload cycles. A single-ended keyed shaft turning right-hand drives laminate vanes that adjust automatically and preserve capacity over a long service life. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. Tapped ports tie the unit into existing piping without custom adapters. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping.