What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
Description: XL1.25A high-speed sliding vane pump, for use in processing, filling and transfer applications.
XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156-product image
ImageSetByPath

XL1.25A, Vane Pump, High Speed, Single Ended, Ductile Iron, 23 GPM

Item: XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
Description: XL1.25A high-speed sliding vane pump, for use in processing, filling and transfer applications.
  • Mounting: PUMP MOUNTED ON UNIT ASSEMBLY
  • Inlet Size: 1 1/4
  • Model: XL1.25A
  • Discharge Size: 1 1/4
  • Max Operating Pressure: 350.0
  • Max Flow Rate (GPM): 23.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
Shipping Weight (lbs):
178
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Mounting:
PUMP MOUNTED ON UNIT ASSEMBLY
Elastomers:
2 FKM ELASTOMERS
Flanges:
0 TAPPED-PORTS
Motor Frame:
M145T
Motor Type:
MOUNT BLACKMER SUPPLIED MOTOR
Motor:
1.5HP 18R 60HZ 3P 230/460V TE 145T
Mounting Unit:
Obsolete_HRO UNIT
Ratio:
RATIO 2.24-780-645
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
66
Relief Valve Spring:
3 51-80 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
Lead Time (days):
27
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
Performance for item XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156

At 100 RPM and 100 psi differential pressure, the XL1.25/XLF1.25 pump delivers 1.5 gpm (5.7 lpm) and requires 0.33 bhp (0.25 kW) with a fluid viscosity of 20,000 SSU.

Downloads for item XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
Item Overview for Blackmer XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156
The Blackmer XL1.25A/4/1R/S0/1/3/2/0/0/0/0/0/0/MT/HRO/R0224/M145T/MTRB/TE929156 serves processing, filling, and transfer applications in refineries, lube oil plants, and general industry as a ductile iron sliding vane pump. Rated for flows reaching 23 GPM, it holds output steady as line conditions shift. The drivetrain pairs a single-ended keyed shaft turning right-hand with Duravane vanes, keeping volumetric efficiency stable between rebuilds. Mechanical seals work alongside FKM elastomers to contain aggressive media and resist chemical attack. Installation stays simple thanks to tapped ports that match common piping practice. An internal relief valve protects the system from damaging pressure spikes. It ships as a complete drive package with a factory-mounted motor and a 2.24:1 gear reducer, ready to set in place and connect. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the XL lineup, it shares parts and service procedures with the rest of the range.