PSG Store is becoming ABORA Stay tuned. Learn more

What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO
Description: XF1C shock resistant sliding vane pump for tight installation requirements.
XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO-product image
ImageSetByPath

XF1C, Vane Pump, High Speed, Flanged Motor, Ductile Iron, 9 GPM

Item: XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO
Description: XF1C shock resistant sliding vane pump for tight installation requirements.
  • Mounting: PUMP ONLY
  • Inlet Size: 1
  • Model: XF1C
  • Discharge Size: 1
  • Max Operating Pressure: 350.0
  • Max Flow Rate (GPM): 9.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO
Shipping Weight (lbs):
88
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
2 FKM ELASTOMERS
Flanges:
0 TAPPED-PORTS
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1L SINGLE END KEYED LH
Relief Valve Spring Setting:
96
Relief Valve Spring:
5 66-125 PSI STEEL RV SPRING
Standard Construction 1:
C W/O FT 56C
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
S0 SVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO
Performance for item XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO

At 1750 RPM and 50 psi differential pressure, the XF1/XB1 pump requires 0.65 bhp (0.48 kW) to handle a fluid with a viscosity of 30 SSU.

At 1750 RPM and 50 psi differential pressure, the XF1/XB1 pump delivers 5.6 gpm (21 lpm) of a fluid with a viscosity of 30 SSU.

Item Overview for Blackmer XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO
The Blackmer XF1C/4/1L/S0/1/5/2/C/0/0/0/0/0/PO is a high-speed sliding vane pump built in ductile iron construction for petroleum and refined fuel transfer. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. Tapped ports tie the unit into existing piping without custom adapters. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the X lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 9 GPM, shortening load and unload cycles. A single-ended keyed shaft turning left-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life.