What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX
Description: X2.5B rotary sliding vane pump, for trouble-free operation and low maintenance cost.
X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX-product image
ImageSetByPath

X2.5B, Vane Pump, High Speed, Single Ended, Cast Iron, 148 GPM

Item: X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX
Description: X2.5B rotary sliding vane pump, for trouble-free operation and low maintenance cost.
  • Mounting: PUMP MOUNTED ON UNIT ASSEMBLY
  • Inlet Size: 2 1/2
  • Model: X2.5B
  • Discharge Size: 2 1/2
  • Max Operating Pressure: 175.0
  • Max Flow Rate (GPM): 148.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX
Shipping Weight (lbs):
40
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Mounting:
PUMP MOUNTED ON UNIT ASSEMBLY
Elastomers:
2 FKM ELASTOMERS
Flanges:
N NPT FLANGES
Motor Frame:
M184T
Motor Type:
NO MOTOR
Mounting Unit:
Obsolete_HRB UNIT
Ratio:
RATIO 3.52-495-410
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
81
Relief Valve Spring:
4 51-110 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
C0 IVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
Lead Time (days):
10
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX
Performance for item X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX

At 780 RPM and 100 psi differential pressure, the GX2.5/X2.5/XH2.5 pump requires 12.3 bhp (9.2 kW) to handle a fluid with a viscosity of 30 SSU.

At 780 RPM and 100 psi differential pressure, the GX2.5/X2.5/XH2.5 pump delivers 144 gpm (545 lpm) of a fluid with a viscosity of 30 SSU.

Item Overview for Blackmer X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX
The Blackmer X2.5B/4/1R/C0/1/4/2/0/0/0/0/N/0/MT/HRB/R0352/M184T/MTRX is a 2.5" single-ended, high-speed sliding vane pump finished in cast iron construction. Capacity extends to 148 GPM, shortening load and unload cycles. The drivetrain pairs a single-ended keyed shaft turning right-hand with Duravane vanes, keeping volumetric efficiency stable between rebuilds. Mechanical seals work alongside FKM elastomers to contain aggressive media and resist chemical attack. Installation stays simple thanks to NPT connections that match common piping practice. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. It ships as a complete drive package with a 3.52:1 gear reducer, ready to set in place and connect. It also brings extended dry-run capability. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the X lineup, it shares parts and service procedures with the rest of the range.