Item Overview for Blackmer NP2.5F/9/1R/G0/1/7/2/0/0/0/0/W/0/PO
The Blackmer NP2.5F/9/1R/G0/1/7/2/0/0/0/0/W/0/PO is a 2.5" single-ended sliding vane pump finished in ductile iron construction. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid. It also brings pre-engineered Integrated Unit Assemblies for drop-in installation. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T2 temperature class. As part of the NP lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 136 GPM, shortening load and unload cycles. Power reaches the pumping chamber through a single-ended keyed shaft turning right-hand, where iron vanes ride out against the liner to sustain flow as they wear. Containment comes from PTFE packing backed by FKM elastomers, a combination chosen for punishing liquids. Weld flanges speed connection during commissioning and later service.