What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO
Description: NP2.5F sliding vane pump, for high temperature, high pressure, and high viscosity requirements.
NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO-product image
ImageSetByPath

NP2.5F, Vane Pump, Single Ended, Cast Iron, 136 GPM

Item: NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO
Description: NP2.5F sliding vane pump, for high temperature, high pressure, and high viscosity requirements.
  • Mounting: PUMP ONLY
  • Inlet Size: 2.5
  • Model: NP2.5F
  • Discharge Size: 2.5
  • Max Operating Pressure: 225.0
  • Max Flow Rate (GPM): 136.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO
Shipping Weight (lbs):
132
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
3 PTFE ELASTOMERS
Flanges:
N NPT FLANGES
Mounting:
PUMP ONLY
Relief Valve:
2 CORROSION RESISTANT RV
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
81
Relief Valve Spring:
4 51-110 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
IA CRANE 5610 CARTRIDGE SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
6 LAMINATE-EC
Lead Time (days):
27
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO
Performance for item NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO

At 500 RPM and 100 psi differential pressure, the NP2.5/NPH2.5 pump delivers 92 gpm (348 lpm) and requires 8.5 bhp (6.3 kW) with a fluid viscosity of 7,500 SSU.

At 100 RPM and 100 psi differential pressure, the NP2.5/NPH2.5 pump delivers 17 gpm (64 lpm) and requires 1.9 bhp (1.4 kW) with a fluid viscosity of 20,000 SSU.

Item Overview for Blackmer NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO
The Blackmer NP2.5F/6/1R/IA/2/4/3/0/0/0/0/N/0/PO is a 2.5" single-ended sliding vane pump finished in ductile iron construction. It also brings pre-engineered Integrated Unit Assemblies for drop-in installation. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the NP lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 136 GPM, shortening load and unload cycles. The drivetrain pairs a single-ended keyed shaft turning right-hand with laminate vanes, keeping volumetric efficiency stable between rebuilds. A cartridge mechanical seal work alongside PTFE elastomers to contain aggressive media and resist chemical attack. Installation stays simple thanks to NPT connections that match common piping practice. Overpressure protection arrives built in, with a corrosion-resistant relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid.