PSG Store is becoming ABORA Stay tuned. Learn more

What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
Description: MLN4B sliding vane pump, for the handling of highly viscous liquids or abrasive slurries.
MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO-product image
ImageSetByPath

MLN4B, Vane Pump, Internal Bearing, Double Ended, Base Mount, Ductile Iron, 590 GPM

Item: MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
Description: MLN4B sliding vane pump, for the handling of highly viscous liquids or abrasive slurries.
  • Mounting: PUMP ONLY
  • Inlet Size: 4
  • Model: MLN4B
  • Discharge Size: 4
  • Max Operating Pressure: 250.0
  • Max Flow Rate (GPM): 590.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
Shipping Weight (lbs):
178
Accessories:
0 None
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
2 FKM ELASTOMERS
Flanges:
X LESS FLANGES
Mounting:
PUMP ONLY
Relief Valve:
1 BOLT ON RV
Rotor and Shaft:
40 DOUBLE END SHAFT
Relief Valve Spring Setting:
163
Relief Valve Spring:
9 126-200 PSI STEEL RV SPRING
Standard Construction 1:
N BUSHING - CARBON
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
1 JACKET OPTION
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
G0 PTFE PACKING
Standard Relief Valve Spring Setting:
1
Vanes:
5 LAMINATE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
Performance for item MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO

At 500 RPM and 100 psi differential pressure, the MLX4/MLXW4/MLN4/MRLX4/MRLXW4/MRLN4 pump requires 31 hp (23 kW) to handle a fluid with a viscosity of 30 SSU.

At 500 RPM and 100 psi differential pressure, the MLX4/MLXW4/MLN4/MRLX4/MRLXW4/MRLN4 pump delivers 405 gpm (1,530 lpm) of a fluid with a viscosity of 30 SSU.

Downloads for item MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
Item Overview for Blackmer MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO
The Blackmer MLN4B/5/40/G0/1/9/2/N/0/1/0/X/0/PO serves conveying thin to highly viscous fluids such as oils, asphalts, molasses, and adhesives as a 4" ductile iron sliding vane pump. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. Rated for flows reaching 590 GPM, it holds output steady as line conditions shift. Power reaches the pumping chamber through a double-ended drive shaft, where laminate vanes ride out against the liner to sustain flow as they wear. Containment comes from PTFE packing backed by FKM elastomers, a combination chosen for punishing liquids. A bolt-on relief valve protects the system from damaging pressure spikes. The bare-shaft build lets integrators match an existing drive or specify a new one. It also brings extended dry-run capability and pre-engineered Integrated Unit Assemblies for drop-in installation.