What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
Description: GNXH4 alignment-free, quiet, positive displacement sliding vane pump for non-corrosive liquids and petroleum products.
GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO-product image
ImageSetByPath

GNXH4A, Vane Pump, Alignment Free, Horizontal Parallel Port, 500 GPM

Item: GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
Description: GNXH4 alignment-free, quiet, positive displacement sliding vane pump for non-corrosive liquids and petroleum products.
  • Mounting: PUMP ONLY
  • Inlet Size: 4
  • Model: GNXH4A
  • Discharge Size: 4
  • Max Operating Pressure: 100.0
  • Max Flow Rate (GPM): 500.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
Shipping Weight (lbs):
53
Accessories:
R0500-250TC
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
2 FKM ELASTOMERS
Flanges:
A ANSI CL 150 RF FLANGES
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
63
Relief Valve Spring:
3 51-75 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
C0 IVCV SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
TOTAL-LEAD-TIME:
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
Performance for item GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO

At 433 RPM and 100 psi differential pressure, the GNX4/GNXH4 pump requires 35.5 bhp (26.5 kW) to handle a fluid with a viscosity of 30 SSU.

At 433 RPM and 100 psi differential pressure, the GNX4/GNXH4 pump delivers 397 gpm (1,503 lpm) of a fluid with a viscosity of 30 SSU.

Downloads for item GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
Item Overview for Blackmer GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO
The Blackmer GNXH4A/4/1R/C0/1/3/2/0/0/0/0/A/R0500-250TC/PO is an alignment-free sliding vane pump built in rugged construction for portable and stationary industrial transfer applications. Mechanical seals and FKM elastomers guard the drive end against leakage and swelling. ANSI Class 150 raised-face flanges tie the unit into existing piping without custom adapters. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the GNX lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 500 GPM, shortening load and unload cycles. A single-ended keyed shaft turning right-hand drives Duravane vanes that adjust automatically and preserve capacity over a long service life.