What can we help you find?

Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Products

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Parts

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Resources

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

  • Support

      What can we help you find?

      Just answer a few questions, and our Product Finder will guide you to the right solution!

Item: GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
Description: GNX3 alignment-free, quiet, positive displacement sliding vane pump for non-corrosive liquids and petroleum products.
GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO-product image
ImageSetByPath

GNX3A, Vane Pump, Alignment Free, High Speed, 275 GPM

Item: GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
Description: GNX3 alignment-free, quiet, positive displacement sliding vane pump for non-corrosive liquids and petroleum products.
  • Mounting: PUMP ONLY
  • Inlet Size: 3
  • Model: GNX3A
  • Discharge Size: 3
  • Max Operating Pressure: 175.0
  • Max Flow Rate (GPM): 275.0

Resolve Pay Buy now, pay later

Net 30 credit terms
0% interest for 30 days Get Approved Today
Attributes for item GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
Shipping Weight (lbs):
178
Accessories:
R0342-280TC
Bypass Valve Relief Valve Spring Setting:
0
Elastomers:
1 BUNA-N ELASTOMERS
Flanges:
A ANSI CL 150 RF FLANGES
Mounting:
PUMP ONLY
Relief Valve:
1 STANDARD VALVE
Rotor and Shaft:
1R SINGLE END KEYED RH
Relief Valve Spring Setting:
81
Relief Valve Spring:
4 51-110 PSI STEEL RV SPRING
Standard Construction 1:
0 STANDARD SELECTION - SC1
Standard Construction 2:
0 STANDARD SELECTION - SC2
Standard Construction 3:
0 STANDARD SELECTION - SC3
Standard Construction 4:
0 STANDARD SELECTION - SC4
Seal:
A0 INCN SEAL
Standard Relief Valve Spring Setting:
1
Vanes:
4 DURAVANE
Lead Time (days):
27
Show All Attributes
Show Fewer Attributes
Recommended Products
Spare Parts for item GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
Performance for item GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO

At 700 RPM and 100 psi differential pressure, the GNX3/GNXH3 pump requires 24 bhp (17.9 kW) to handle a fluid with a viscosity of 30 SSU.

At 700 RPM and 100 psi differential pressure, the GNX3/GNXH3 pump delivers 265 gpm (1,000 lpm) of a fluid with a viscosity of 30 SSU.

Downloads for item GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
Item Overview for Blackmer GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO
The Blackmer GNX3A/4/1R/A0/1/4/1/0/0/0/0/A/R0342-280TC/PO is a 3" alignment-free, high-speed sliding vane pump finished in heavy-duty construction. Hazardous-area duty is covered by ATEX approval for IIB gas atmospheres with a T4 temperature class. As part of the GNX lineup, it shares parts and service procedures with the rest of the range. Capacity extends to 275 GPM, shortening load and unload cycles. The drivetrain pairs a single-ended keyed shaft turning right-hand with Duravane vanes, keeping volumetric efficiency stable between rebuilds. Mechanical seals work alongside Buna-N elastomers to contain aggressive media and resist chemical attack. Installation stays simple thanks to ANSI Class 150 raised-face flanges that match common piping practice. Overpressure protection arrives built in, with an internal relief valve shielding the casing and downstream piping. Supplied as a bare unit, it drops into an existing drive arrangement or a purpose-built skid.